An Aer Lingus flight was forced to return to Shannon Airport this afternoon after the jet experienced an engine failure shortly after departure.
Flight EI-990, an Airbus A321neo jet, was repositioning from Shannon Airport to Dublin Airport at the time. There were no passengers on board the aircraft, just a crew of two.
The flight departed at 12.22pm and had been cleared to its cruising altitude when the crew advised air traffic controllers of their issue and requested to return to the airport. The crew reported an ‘engine stall’ on engine number 1 and confirmed that the engine had then ‘shut itself down’.
Authorities at Shannon Airport were notified of incident while the airport’s own fire and rescue service was also alerted. Fire crews were mobilised to designated holding points adjacent to the runway ahead of the aircraft’s arrival.
The flight landed safety at 12.49am and was pursued along the runway by emergency crews who also accompanied the jet to the terminal.
Engineers are expected to investigate the issue before the aircraft is cleared to fly again.
An Aer Lingus spokesperson confirmed: “Aer Lingus flight EI990, a positioning flight from Shannon to Dublin, returned to Shannon Airport shortly after take-off this afternoon following a technical issue. The flight landed safely in Shannon a short time later.”
